PL
|
|
Needle bearing
for Suzuki Vitara I and Grand Vitara I / XL7
Needle bearing for guiding the front (outer) CV joint inside the hub knuckle.Fits to:
- Suzuki Grand Vitara I / XL7 - all versions from 1998–2006.
- Suzuki Vitara - only certain version produced after 1995, that are equipped with a needle bearing.
Does not fit to Suzuki Vitara models, where a brown sleeve (OE 43445-60A11) is used instead of the needle bearing 09263-28030 and washer 44183-60A00.
Available options:
- NTN 7EHK2816CPX12AS - aftermarket part with OEM-level quality
Made in Japan.
- 09263-28030 - original Suzuki bearing.
Made in Japan.
| Item name | Use in | Price |
|---|---|---|
| NTN Needle bearing 1 piece Item code: NTN-7EHK2816CPX12AS | Suzuki Vitara I: all models with needle bearing Suzuki Grand Vitara I: all models Suzuki Grand Vitara XL7: all models | $9 €8 30 PLNAdd to Cart |
| OE Suzuki Needle bearing 1 piece Item code: 09263-28030 | Suzuki Vitara I: all models with needle bearing Suzuki Grand Vitara I: all models Suzuki Grand Vitara XL7: all models | $25 €22 85 PLNAdd to Cart |
Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.
|
 |
Steering System (Idler Arm Bushing, Tie Rods, etc.) |
 |
Steering Knuckle Parts (Seals, Bearings, Washers, etc.) |
 |
V6 Timing Kit Vitara I / Grand Vitara I / XL7 |
 |
Axle Shafts / Drive Shafts Vitara I / Grand Vitara I / XL7 |
 |
ROE Front A-Arms Vitara I / Grand Vitara I / XL7 |
 |
Shock Absorbers Vitara I / Grand Vitara I / XL7 |
 |
Polyurethane Bushing Sets Vitara I / Grand Vitara I / XL7 |
 |
Stabilizer Bushes Set Vitara I / Grand Vitara I / XL7 |
 |
Bump Stop Vitara I / Grand Vitara I / XL7 |
 |
Ball Joints |