PL
|
|
Radzikone Bushes set for original control arms
in Suzuki Vitara I
Replacements for all rubber-metal control arms sleeves.
Do not fit to Radzikone control arms
(ask about bushes that fit to Radzikone control arms).
Poliurethanes made by Deuter.
Stainless steel sleeves increase the life of the set several times.
Does not improve driving characterisitics.
Made in Poland.
Atest + 3 years warranty.
- four bushes with stainless steel sleeves for two front original a-arms
- four bushes with stainless steel sleeves for two rear lower control arms
- two bushes with stainless steel sleeves for rear upper control arm
- optional: bolts for all five control arms
| Item name | Use in | Price |
|---|---|---|
| Bushes Set Item code: DEU-SV-ZTP | Suzuki Vitara I: all models | $155 €135 545 PLNAdd to Cart |
| Bushes Set with Bolts Item code: DEU-SV-ZTPS | Suzuki Vitara I: all models | $172 €150 605 PLNAdd to Cart |
Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.
We also offer OE Suzuki stabilizer bushes set.
 |
Steering System (Idler Arm Bushing, Tie Rods, etc.) |
 |
Steering Knuckle Parts (Seals, Bearings, Washers, etc.) |
 |
V6 Timing Kit Vitara I / Grand Vitara I / XL7 |
 |
Axle Shafts / Drive Shafts Vitara I / Grand Vitara I / XL7 |
 |
ROE Front A-Arms Vitara I / Grand Vitara I / XL7 |
 |
Shock Absorbers Vitara I / Grand Vitara I / XL7 |
 |
Polyurethane Bushing Sets Vitara I / Grand Vitara I / XL7 |
 |
Stabilizer Bushes Set Vitara I / Grand Vitara I / XL7 |
 |
Bump Stop Vitara I / Grand Vitara I / XL7 |
 |
Ball Joints |