Radzikone 5 mm Wheel Spacer

Essential for mounting some of the steel rims from our offer. Some rims do not fit over the front brake calipers, so it is necessary to install two 5 mm spacers on the front axle – one on each side.

In Suzuki Vitara and GV I with 3" or 4" suspension lifts, the front wheel track decreases, and the spacers slightly increase it. Installing spacers on the rear wheels is not recommended, as the rear track is already wider than the front (do not concerns GVK 4" Lift).
WARNING: 5 mm spacers cannot be used with alloy rims – they are too “thick,” and the wheel studs will be too short.
Steel rims are thinner, so the wheel studs protrude sufficiently, making the installation of 5 mm spacers completely safe.

Wheel spacers with a thickness of ≥ 25 mm are first mounted onto the hubs, and the rims are then attached to their built-in studs. Because of this, such spacers can loosen or crack, and therefore they are never as safe as 5 mm through-type spacers.

Bolt pattern: 5x139.7 and 6x139.7
Center hole: 110 mm
Certified, high quality galvanized steel
Made in Poland
10-year warranty

Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.