Radzikone winch mounting plate
for Suzuki Grand Vitara I

Complete with radiator plate, which is and an additional lower rainfored mount.
Installed in original holes in the frame, no welding required.
Possible to install in original plastic bumper.

Fits most winches, for example:
Dragon Winch DWM 12000, DWM 13000, DWH 9000, DWH 12000, DWH 15000
Escape EVO IP68, EWX-Q, EWX-QF, EWB, Dual Speed
KingOne TDS-9.5H, TDS-12.0H
Kangaroo Winch K7000 XP, K8000 XP, K9000 XP, K10000 XP, K12000 XP, K14000 XP

After installing the front winch, replace the front springs with appropriate "for the winch" or add adjustment spacers above the springs.

Two versions to choose:
IMPORTANT: a 1", 2", or 3" Body Lift is the raising of the vehicle’s body on the chassis. Do not confuse it with a Suspension Lift.

Winch mounting plate R-SGV-PPW use in:

• GV I without Body Lift
• GV I with 1" Body Lift

Winch mounting plate R-SGV-PPWBL2 use in:

• GV I with 2" or 3" Body Lift
• GV I without Body Lift or with 1" Body Lift (trimming needed = better approach angle)

Safe and solid construction made with rainforced steel.
Designed, tested and made in Wroclaw / Poland.

Parts preceisly made of laser cut elements.
Certified, high quality steel.
Galvanized metal parts.
Powder coated (ISO 9001: 2008 certified).
No road approval.
10 years warranty.

Kit contains:

• winch mounting plate
• plate side mounts, 2pcs.
• lower rainforcement (radiator plate)
• mounting bolts
• installation instruction

OPTIONAL:

• towing eyes - very durable, 12mm thick

Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.

The kit is a perfect set to create a steel bumper yourself.
All you need to do is sides and you have durabily installed bumper,
with towing eyes and possibilty to use Hi-Lift.