Radzikone Towing eye
for Suzuki Vitara I and Grand Vitara I
Very strong - 12cm thick.Bumper cutting required.
Short towing eye to the front:
Fits only to Radzikone winch mounting plate.
Long towing eye to the rear - screwed to the frame, in the towing hook mounting holes.
If you have a tow hook, use two towing eyes, for both side of the frame (should be installed between frame and the hook).
Parts preceisly made of laser cut elements.
Certified, high quality steel.
Powder coated (ISO 9001: 2008 certified).
Mounting screws included.
No road approval.
10 years warranty.
Item name | Use in | Price |
---|---|---|
Short Towing Eye Item code: R-SVGV-UHK | Radzikone Winch mounting plate all versions Suzuki Vitara I for rear: 3d 1.6 8v 3d 1.6 16v 3d 2.0 16v | 105 PLNAdd to Cart |
Long Towing Eye Item code: R-SVGV-UHD | Suzuki Vitara I for rear: 5d 1.6 16v 89-96 5d 2.0v6 95-98 5d 2.0TD RF 96-98 Suzuki Grand Vitara I for rear: all models | 120 PLNAdd to Cart |
Photo instruction
Ultraps |
Jack |
Idler arm brace bracket Vitara I |
Rear disc brakes mounting kits Vitara I / Grand Vitara I |
Towing eyes |
Bigger spare wheel holder Vitara I / Grand Vitara I / XL7 |
Chassis skid plates Vitara I / Grand Vitara I / XL7 |
Steel bumpers Grand Vitara I / XL7 |
Winch mounting plates Vitara I / Grand Vitara I / XL7 |
Driveshaft support bearing Vitara I / Grand Vitara I / XL7 |
Snorkel Vitara I / Grand Vitara I / XL7 |
Right inner driveshaft joint extension Vitara I / Grand Vitara I / XL7 |
Gasket ring gear spacer Vitara I / Grand Vitara I / XL7 |
180A Alternator bracket Vitara I / Grand Vitara I |
Front bump stop spacers Vitara I / Grand Vitara I / XL7 |
Rear prop spacer Vitara I |
Middle bracket of steel diff Vitara I |
T-case gear set Vitara I / Grand Vitara I / XL7 |
Differential air lockers Vitara I |
Air compressors |
5mm wheel spacer |
Manual Locking Front Hubs Vitara I / Grand Vitara I / XL7 |
Snorkel grille |