3" Radzikone Lift Kit
for Suzuki Grand Vitara XL7 (2001-2003)

MORE INFO

Suzuki Grand Vitara XL7 with stock suspension is not well in off-road driving.
With lift kit installed, not only the clearance is increased by 7,5cm but the whole charcteristic of the suspension also changes.

In the front, togheter with lift kit, entire range of shock absorbers is transferred.
Additionally front shocks have bigger damping force. This, with combination of their better characteristics improves suspension and comfort.
However, the most important are increased ramp travel index and off-road capabilities.
The innovative construction front control arms raise the front of the car by 55mm, are further away from the ground than the original ones, what increases the ground clearance.
They also move wheels forward, so after trimming the lower edge of the front bumper, we can fit bigger wheels.
Maximum tire size which can be fit without cutting sill or fender, is 30" (we recommend 235/70R16 or 245/70R16).
To fit larger than original tires , more offset rims ET -15 or ET -25 are required.
With original size tires, original rims with ET +5 may be used.

Lack of "tatra effect" (wrong front wheel angle).

In the rear, 8,5cm longer gas shocks (4cm bigger stroke) increase the ramp travel index extremaly. Longer rear springs improve suspension and comfort.

Summarizing:
Grand Vitara XL7 with Radzikone lift kit 7,5cm drives better, more comfortable and off-road capabilities are increased extremaly.

Additional advantage is much more cheaper exploitation than in a car with original suspension, thanks to, among others replacable ball joints in from control arms. All future works with suspension and front drivetrain are several times faster, easier and cheaper.

• Detailed assembly instruction


• Front control arms
• Polyurethane sleeves with stainless steel sleeves and screws
• Polyurethane spring's seats in control arms
• 555 SB-7542 ball joints
• Metal spacers above the front spring's seats
• Front bump stop spacers
• Steering stops
• Front strut spacers
• KAYABA Ultra SR front shock abosrbers
• Front diff drop bracket kit


• KAYABA Rear shock absorbers
• Rear springs
• Rear brake hose with cover
• Panhard lowering bracket
• Rear prop spacer
• Cable ties
• Hose for venting rear axle + hose clamps

Parts preceisly made of laser cut elements.
Certified, high quality steel.
Top quality welds.
Metal parts, stainless or galvanized.
Red elements powder coated (ISO 9001: 2008 certified).
Mounting screws included.
Weight: 58kg
No road approval.

Warranty:
10 years for Radzikone elements
3 years for shocks, springs, bushes, ball joints