4" Radzikone Lift Kit
for Suzuki Vitara I, X90, Sidekick
1.6 8v, 1.6 16v (1989–1998)

(in Santana Vitara I 1994–2005 additional modifications required*)

Raises the Vitara by 10 cm on suspension.
Comfortable for daily driving.
Handles tough off-road conditions with ease.
Uses the same components as the 3" Lift – only the springs differ.
This results in better performance in deep ruts.
WARRANTY: 10 years for Radzikone parts and 3 years for shock absorbers and springs.

*NOTE: if the VIN starts with “V”, 1994–2003 Santana Vitara models were equipped with “weak” Spanish drive shafts with too small working angle – they must be replaced. Read more.
In 2003–2005 Santana-Vitara models equipped with “strong” Spanish drive shafts (left one bolted to the differential with 6 bolts), installation requires VB extended front A-arms from the 4" PLUS Lift Kit.
In 1989–2003 models VB A-arms are not required, but they can definitely be used. You can also choose the complete 4" PLUS Lift Kit right away :)

All parts and mounting bolts required for installation are included
(if the VIN starts with “V”, additional modifications are required*)

Lift Kit includes:

• Front springs
• Front bump stop spacers
• Front differential drop brackets
• Front strut spacers with wheel camber adjustment and bolts


• Progressive rear springs
• Kayaba rear gas shock absorbers (+11 cm) with bolts
• Rear prop shaft spacer with bolts
• Rear upper control arm spacer with bolts
• Cable ties for handbrake cables relocation


• Extended differential breather hoses
• Installation manual with helpful tips

Parts precisely made from laser-cut components.
Certified reinforced steel.
Highest quality welds.
Galvanized metal components.
Red parts powder-coated (ISO 9001:2008 certificate).
Mounting bolts included.
Kit weight: 28 kg.
No homologation.
10-year warranty on Radzikone parts,
3 years on shock absorbers and springs.

We also recommend front shock absorbers with increased damping force.
(not part of the Lift Kit. Not required, but recommended)
Available options:
Excel-G (black) or stiffer Ultra-SR (gold)

Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.

**IMPORTANT: If your vehicle does not have a front winch installed – do not buy the winch version kit. Installed on a vehicle without a winch it will damage the front shock absorbers and cause incorrect front wheel camber.

Front spring height is selected based on the number of doors, engine type and the presence of a winch. This is very important, as the height of the front of the vehicle directly affects the camber algle of the front wheels. Incorrectly selected springs cause improper wheel angles, resulting in poor vehicle handling and significantly accelerated shock absorber wear (limited suspension travel and bottoming out).
If a winch is only planned at the time of purchase, contact us after it is installed. We will then select appropriate metal adjustment spacers mounted above the upper front spring seats, allowing correction of vehicle height and front wheel camber.

*NOTE: if the VIN starts with “V”, 1994–2003 Santana Vitara models were equipped with “weak” Spanish drive shafts with too small working angle – they must be replaced. Read more.
In 2003–2005 Santana-Vitara models equipped with “strong” Spanish drive shafts (left one bolted to the differential with 6 bolts), installation requires VB extended front A-arms from the 4" PLUS Lift Kit.
In 1989–2003 models VB A-arms are not required, but they can definitely be used. You can also choose the complete 4" PLUS Lift Kit right away :)

Installation guide and photos: