4" PLUS Radzikone Lift Kit
for Suzuki Vitara I / X90
1.6 8v / 1.6 16v (1989–1998)

(In Santana Vitara I 1994–2003 modifications required*)

Designed for the toughest off-road conditions.
Also suitable for daily driving.
The biggest advantage is the extended front A-arms and rear control arms.
WARRANTY: 10 years for Radzikone parts and 3 years for shock absorbers, springs and polyurethane components.

*NOTE: in 1994–2003 models with VIN starting with “V”, “weak” Spanish drive shafts with too small working angle were used – they must be replaced. Read more.

All parts and Mounting bolts required for installation are included
(only Santana Vitara I models from 1994–2003 require modifications*)

Lift Kit includes:

• Front springs
• Polyurethane upper front spring seats
• Front bump stop spacers DOP25
• Front differential drop brackets
• Front strut spacers with camber adjustment and bolts
• Front A-arms with polyurethane bushings, stainless sleeves and bolts
• Polyurethane lower front spring seats


• Progressive rear springs
• Polyurethane upper rear spring seats
• Kayaba rear gas shock absorbers (+16 cm) with bolts
• Thick rear prop shaft spacer with bolts
• Rear upper control arm spacer with rearward offset and bolts
• Longer rear brake hose with cover
• Extended rear lower control arms with polyurethane bushings, stainless sleeves and bolts
• Cable ties for handbrake cables relocation


• Extended differential breather hoses
• Installation manual with helpful tips

Parts precisely made from laser-cut components.
Certified reinforced steel.
Highest quality welds.
Metal components galvanized or stainless.
Red parts powder-coated (ISO 9001:2008 certificate).
Mounting bolts included.
Kit weight: ~65 kg.
No homologation.
10-year warranty on Radzikone parts,
3 years on shock absorbers, springs and polyurethane components.

We also recommend front shock absorbers with increased damping force.
(not part of the Lift Kit. Not required, but recommended)
Available options:
Excel-G (black) or stiffer Ultra-SR (gold)

Prices in USD ($) and EUR (€) are calculated using an internal exchange rate. All payments are processed in PLN.

**IMPORTANT: If your vehicle does not have a front winch installed – do not buy the winch version kit. Installed on a vehicle without a winch it will damage the front shock absorbers and cause incorrect front wheel camber.

Front spring height is selected based on the number of doors, engine type and the presence of a winch. This is very important, as the height of the front of the vehicle directly affects the camber angle of the front wheels. Incorrectly selected springs cause improper wheel angles, resulting in poor vehicle handling and significantly accelerated shock absorber wear (limited suspension travel and bottoming out).
If a winch is only planned at the time of purchase, contact us after it is installed. We will then select appropriate metal adjustment spacers mounted above the upper front spring seats, allowing correction of vehicle height and front wheel camber.
*NOTE: if the VIN starts with “V”, 1994–2003 Santana Vitara models were equipped with “weak” Spanish drive shafts with too small working angle – they must be replaced. Read more.