Steering Tie Rods for Suzuki Grand Vitara I
Available in two types – they differ in thread size on the rack end: 14 mm or 16 mm.
Note!
Many aftermarket replacements have a significantly smaller working angle than the original Suzuki tie rods, which makes them unsuitable for use with 2", 3", or 4" suspension lifts.
Steering tie rods with M16 thread on the steering rack side
| Manufacturer | Part number | Maximum operating angle |
|---|---|---|
| Suzuki | 48830-65D00 | 33° |
| TRW | JAR1183 (our choice) | 31° |
| Ruville | RUV917724 | 34° |
| Moog | SZ-AX-2872 | 34° |
| FAG | 840007510 | 33° |
| Lemforder | LMI3452301 | 33° |
| Meyle | 33-160310002 | 31,5° |
| SKF | VKDY826001 | 31,5° |
| Kayaba | KRE1144 | 28° (Not compatible with Radzikone Lift Kit) |
| Blue Print | ADK88722 | 28° (Not compatible with Radzikone Lift Kit) |
| Febi Bilstein | FEB28057 | 27,5° (Not compatible with Radzikone Lift Kit) |
| 555 | SR-7590 | 27° (Not compatible with Radzikone Lift Kit) |
| Delphi | DELTA2349 | 27° (Not compatible with Radzikone Lift Kit) |
| Yamato | I38009YMT | 25° (Not compatible with Radzikone Lift Kit) |
Radzikone Guides
![]() |
How to measure a shock absorber |
![]() |
Zdradzamy przeróbki i patenty w aucie do rajdów |
![]() |
Quick front spring replacement with Radzikone A-arms |
![]() |
Suzuki Vitara I mods Suzuki Vitara I |
![]() |
3x Grand Vitara - 3d, 5d, XL7 - which one to choose? What engine? What tires? |
![]() |
Radzikone recovery tracks |
![]() |
Front knuckles Suzuki Vitara I / Grand Vitara I |
![]() |
Tie rods Suzuki Grand Vitara I |
| Wheel alignment setting Suzuki Vitara I / Grand Vitara I |
![]() |
Tie rods ends and tie rods Suzuki Vitara I |
![]() |
Front steel differential Suzuki Vitara I / Grand Vitara I |
![]() |
Axle ratios Suzuki Vitara I / Grand Vitara I |
![]() |
Satellite-Gear Carrier / Diff Case Types Vitara / Grand Vitara I / Samurai |
![]() |
Vitara & GVI - self-made 4-spider gear carrier |
![]() |
Front driveshafts Suzuki Vitara I |
![]() |
Front driveshafts Grand Vitara I / XL7 |
![]() |
How and how much cut the arches to fit too big tires? |
![]() |
Budget overland setup |
Other
![]() |
The body “floats” on the frame |
![]() |
Lift 4" PLUS, wzmacniane półosie itp. w Vitarze 2.0 Adama |
![]() |
Wyprawowa XL7 z Liftem 3" okiem widza w Terenwizji |
![]() |
Dawid z firmy Deler wybiera i montuje Lift do Grand Vitary I |
![]() |
"Terenwizja" guide Suzuki Vitara I |
![]() |
Front locking hub rebuild |
![]() |
How to check wheel offset |
![]() |
Rally safety tips |
Installation instructions
![]() |
Installing the Radzikone 4" Lift Kit for Grand Vitara I |
![]() |
3" and 4" Radzikone lift kit assembling Suzuki Vitara I |
![]() |
Setting the wheel alignment with Radzikone suspension lift kit Suzuki Vitara I / Grand Vitara I |
PL



























